Ide Sony
2011
![]() |
![]() SONY SDX420C AIT1 IDE US $250.00
|
![]() NEW Sony SDX 420V AIT 1 Tape drive Int 35 91GB IDE ATA ATAPI US $250.00
|
![]() Sony AITi90 A 35 90GB AIT 1 IDE ATAPI Internal Tape Drive AITi90A Refurb US $245.00
|
![]() 18 50pin IDE 128GB SSDSony TR Fujitsu P7230Toshiba US $208.00
|
![]() 3x SONY AIT1 Turbo IDE SDX 460V Tape Drives ATDNA2A US $199.00
|
![]() SONY AITI90A 35 91GB AIT1 IDE ATAPI US $195.00
|
![]() SONY SDX 420C R 35 91GB INTERNAL IDE ATAPI TAPE DRIVE A US $195.00
|
![]() SONY SDX 520C 50 130GB IDE ATAPI AIT2 TAPE DRIVE US $195.00
|
![]() SONY AITI130A S AIT2 IDE 50 130GB TAPE DRIVE US $185.00
|
![]() 18 50pin IDE 32GB SSDSony TR TXFujitsu P1610 P7230 US $85.00
|
![]() 18 50pin IDE 32GB SSD Sony TR TX Fujitsu P1610 P7230 US $82.98
|
![]() KingSpec 32GB 18 CF 50 Pin IDE SSD Sony T1XP T2XP TR5 US $82.98
|
![]() R5024 Dell Drive Assy DvdRw 8X Sony Ide Abcs US $81.95
|
![]() M7600 Dell Drive Dvd Rw 8X Ide Sony Sff US $81.95
|
![]() KingSpec 8GB 18 CF 50Pin IDE SSD Sony X505 TR2 Dell X1 US $80.98
|
![]() SSD 16GB 18 IDE 50 PIN CF for Sony vaio Toshiba Ajb US $58.99
|
My old IDE Sony DVD Drive was not reading some dvd's so I got a New LG Super Multi Drive but it doesn't work?
I switched off the power and switch and connected my new IDE LG and it got connected and I switched on the power and a screen came saying"Reboot and select proper boot device or insert boot media in selected boot device" I pressed the button on the lg drive and it opened but whats the use,it is working but windows doesn't start,so I restarted the PC and went into bios and my master drive which was set to Samsung 80 GB HDD was not detected and my Slave Drive Lg Dvd drive was not detected either.So to get access to windows i removed the cables connecting the lg drive and now the computer is working fine but plz help me abt my Disk Drive.
it's a jumper problem
on your old sony dvd drive to left hand side there should be a small plastic of any color but looks like this
http://rds.yahoo.com/_ylt=A0S020y8_mVMjmgAig6jzbkF/SIG=12ta0sahg/EXP=1281839164/**http%3a//img.tomshardware.com/us/2002/09/04/building_your_own_pc/jumper.jpg
it's very small and very necessary on the back of your lg drive it should say M S C
master slave cable select since you selected your hard drive as the master make sure your jumper on your hard drive is under the M and on your LG drive make sure it is under S then make sure the data and power cords are connected and you should be good to go
Sony 3D - Two Worlds 3D Version


US $540.00

























































































